TM 9--2815--247--34 OIL PRESSURE COMPARTMENT BAFFLE, OIL PUMP, AND ASSOCIATED PARTS REPLACEMENT -- CONTINUED 0081 00 Installation -- Continued 9.   Install new preformed packing (7) on tube assembly (2). 10. Install tube assembly (2) behind dirt deflector (5) by inserting into oil pump (6) hole and lining up with hole in dirt deflector (5). 11. Secure tube assembly (2) to dirt deflector (5) with two new self--locking nuts (3) and two screws (4) but do not tighten yet. 12. Torque six screws (19) to 120--125 lb--in (13.56--14.12 NSm). 13. Torque five screws (11 and 16) to 275 lb--in (31 NSm). 14. Torque two screws (10) to 120--125 lb--in (13.56--14.12 NSm) and screw (9) to 275 lb--in (31 NSm). 15. Tighten two self--locking nuts (3) and two screws (4). 16. Install new gasket (1). 17. Install new wire non--electrical in screws (9, 10 and 11). Figure 18 10 9 11 6 16 8 1 2 4 5 7 3 19 19 NOTE FOLLOW--ON MAINTENANCE: Install oil pan (WP 0080 00) END OF TASK 0081 00--5/6 blank