TM 9--2815--247--34 0085 00--15 ACCESSORY DRIVE HOUSING ASSEMBLY AND ASSOCIATED PARTS REPAIR -- CONTINUED 0085 00 Assembly -- Continued 16. Install fan drive clutch assembly (14). Refer to WP 0089 00. Installation WARNING 1.   Attach accessory drive sling assembly (10) to accessory housing assembly (4) using two new self--locking slave nuts (6), two flat washers (7), and cooling fan attaching slotted nut (11). 2.   Adjust lifting eye in slot of accessory drive sling assembly (10) to assure balanced position of accessory housing assembly (4). 3.   Attach accessory drive sling assembly (10) to a suitable hoist (12). 4.   Install four new preformed packings (13) on accessory base assembly (5). 5.   Apply a thin coat of sealant on mounting surface of accessory base assembly (5). 6.   Lift accessory housing assembly (4) straight up until housing clears the long studs of accessory base assembly (5) and carefully lower in place. 7.   Remove accessory drive sling assembly (10) from accessory housing assembly (4). Figure 31 10 5 4 5 13 13 12 11 6 7 14