TM 9--2815--247--34
0088 00--20
AUTOMATIC FUEL INJECTION ADVANCE CONTROL ASSEMBLY AND
ASSOCIATED PARTS REPAIR -- CONTINUED
0088 00
Assembly -- Continued
27. Install six machine bolts (19) through spur gearshaft (11), housing (27), housing (32), and into cover (20).
28. Secure machine bolts (19) with locking wire (18).
29. Move adjusting ring (16) to align scribe marks on flyweight assembly (17), spur gearshaft flange (11), and adjust-
ing ring (16).
30. Lubricate two threaded pins (24) with lubricant.
31. Install two slotted nuts (22) and two flat washers (23) on threaded pins (24).
32. Tighten two slotted nuts (22) to 110--150 lb--in (12--17 NSm).
33. Secure two slotted nuts (22) with two new cotter pins (21).
18
19
21
22
23
20
11
27
16
24
24
17
32
Figure 33
Figure 33
|
|
