TM 9--2815--247--34 0088 00--30 AUTOMATIC FUEL INJECTION ADVANCE CONTROL ASSEMBLY AND ASSOCIATED PARTS REPAIR -- CONTINUED 0088 00 Test -- Continued 26. Check the readings taken at each 200 rpm increase against similar points on the approved advance curve. If the advance readings fall within the prescribed limits on the curve, the test is complete, proceed with step 27. If the advance readings do not meet the curve limits, proceed to adjustment procedure. INJECTION ADVANCE-- CRANKSHAFT DEGREES ^NOTE:Curve Of Fuel Injection Pump Hydraulic Advance Unit ENGINE CRANKSHAFT RPM 200 600 1000 1400 1800 2200 2600 0 2 4 6 8 10 12 14 CONDITIONS OF TEST: DATE OIL TEMP. OIL PRESS. SERIAL NO. OBSERVER REMARKS INJECTION ADVANCE CURVE TEST BENCH CALIBRATION COUNTER READING DEGREES ADVANCE START 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 TITLE SPECIAL FEATURES ENG. MODEL CURVE NO. ⁺-- ⁺-- 3 OIL: SAE 30, 250 F   5 F OIL PRESSURE: 30 PSI   2 PSI FUEL SUPPLY PRESSURE: 40 PSI FUEL INJECTION PUMP FULL RACK-- 230 M/M