TM 9--2815--247--34 0095 00--1 REAR FAN DRIVE AND ASSOCIATED PARTS REPAIR 0095 00 THIS WORK PACKAGE COVERS: Disassembly, Inspection, Assembly INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 19, WP 0103 00) Outside micrometer caliper set (item 9, WP 0103 00) Inside micrometer caliper set (item 10, WP 0103 00) Telescoping gauge set (item 16, WP 0103 00) Arbor press (item 2, WP 0103 00) Snap ring pliers (item 44, WP 0103 00) Materials/Parts Retaining ring (item 120, WP 0102 00) Retaining ring (item 112, WP 0102 00) Preformed packings (2) (item 74, WP 0102 00) Hose (item 38, WP 0102 00) Safety goggles (item 28, WP 0100 00) Equipment Conditions Engine on maintenance stand (WP 0056 00) Mechanical drive housing and associated parts (fan tower, damper end) removed (WP 0096 00) Accessory drive housing assembly and associated parts removed (WP 0085 00) Disassembly NOTE Front fan drive shaft assembly was removed with front fan tower. Refer to WP 0096 00. 1.   Remove straight shaft (1) from two metal tube assemblies (2 and 3). WARNING 2.   Remove retaining ring (4) from straight shaft (1). Discard retaining ring. 3.   Remove two preformed packings (5) from two metal tube assemblies (2 and 3). Discard packings. 4.   Remove two hose clamps (6), two shaft retaining plates (7), and hose (8). Discard hose. Figure 53 1 4 5 2 7 6 8 6 7 3 5