TM 9--2815--247--34 DISASSEMBLY/ASSEMBLY PROCEDURE SEQUENCE FOR THE AVDS 0105 00 1790--8CR ENGINE -- CONTINUED Table 2. ENGINE ASSEMBLY PROCEDURE SEQUENCE -- CONTINUED Sequence Number Reference Description Task 92. INSTALL Engine on flat cart and install oil pan WP 0080 00 93. INSTALL Fuel pump TM 9--2350--292--20 94. INSTALL Starter and support TM 9--2350--292--20 95. INSTALL Alternator check valve TM 9--2350--292--20 96. INSTALL Wire harness bracket behind alternator TM 9--2350--292--20 97. INSTALL Alternator support cradle TM 9--2350--292--20 98. INSTALL Alternator TM 9--2350--292--20 99. INSTALL Turbochargers WP 0040 00 and WP 0041 00 100. INSTALL Lower plates WP 0053 00 101. INSTALL Upper oil filler tube TM 9--2350--292--20 102. INSTALL Rear crankcase breather TM 9--2350--292--20 103. INSTALL Wire harness TM 9--2350--292--20 104. INSTALL Top deck TM 9--2350--292--20 105. INSTALL Front and rear fans TM 9--2350--292--20 106. INSTALL Right front, right rear, left front, left rear cylinder cover WP 0052 00 107. INSTALL Engine oil level gauge rod “dipstick” TM 9--2350--292--20 108. INSTALL Front and rear centrifugal housings “fan vanes” TM 9--2350--292--20 109. INSTALL Oil sampling system TM 9--2350--292--20 110. INSTALL Smoke fuel supply tube to rear bulkhead elbow, shutoff valve and bracket TM 9--2350--292--20 END OF TASK 0105 00--9/10 blank