TM 9-2815-250-24&P
2-27. SOLENOID REPLACEMENT AND ADJUSTMENT.
This Task Covers:
a. Removal
b. Installation
c. Adjustment
Initial Setup:
Tools/Test Equipment:
Socket wrench set, 3/8-inch drive (Item 27,
General mechanic's tool kit, automotive
Appendix G)
(Item 15, Appendix G)
Screwdriver attachment, 6 mm (Item 24,
Materials/Parts:
Appendix G)
O-ring (Item 32, Appendix F)
a.
REMOVAL
1.
Remove two clips (2) from connecting link (1). Remove connecting link (1) from governor lever (4), plunger (3),
and solenoid (8).
2.
Remove two screws (7) and washers (6) and solenoid (8) from bracket (5).
3.
Remove stud (10) from solenoid (8). Remove connector (12) and two nuts (9 and 11) from stud (10).
2-30
|
|
