ARMY TM 9-2815-252-24
AIR FORCE TO 38G1-92-2
9. Carefully remove governor lever assembly and fuel pump rack (6) from crankcase.
3-23.2. Repair.
a. Remove two thrust washers (1 and 2, FIGURE 3-20) and sleeve (3) from camshaft,
b. Remove pin (12, FIGURE 3-19) shim (13) and retainer (2) from droop adjust screw (14); remove screw (14).
c. Disconnect spring (15) from governor lever (6) bushing.
d. Remove two nuts (16) and capscrews (17) from end cover.
e. Remove capscrew (18) and washer (19) from inside crankcase, remove spring (20), bushing (21), and lever
assembly (22). From outside crankcase remove bushing (23), preformed packing (24), and lever (26).
Discard preformed packing (24). Remove trip lever spring (26).
f. From inside crankcase, remove capscrew (27) and washer (28); remove lever (29).
9. From outside crankcase, remove speed quadrant (30) and preformed packing (31). Discard preformed
packing (31).
h. If damaged, remove bushing (32).
3-41
|
|
