ARMY TM 9-2815-253-24 AIR FORCE TO 38G1-93-2 MARINE CORPS TM 2815-24/3 e. Install tee fitting (13) into hose (16). f. Install tee fittings (13) in hose (15). g. Connect hoses (5) to tee fittings (13) and to fuel injectors (8). h. Connect hose (10) to tee fitting (13) and secure hose (10) with new tiedown straps (14). i. Install union (11) and washer (12) to end of fuel supply hose. j. Connect hose (10) to union (11). 3-19.  FUEL SOLENOID. 3-19.1.  Removal. a. Tag and disconnect electrical leads from solenoid (8, FIGURE 3-14). b. Remove capscrew (1), knob (2), washer (3), and retaining nut (4) securing linkage (5) to lever (13). c. Remove  two  capscrews  (6)  and  washers  (7)  securing  solenoid  (8)  to  bracket  (11);  remove  solenoid  (8)  with linkage (5). d. Count number of threads exposed prior to unscrewing linkage (5).  This will aid installation and adjustment. e. If damaged or if replacing solenoid, loosen locknut on linkage (5) and unscrew linkage from solenoid (8). f. If damaged, remove two nuts (9) and washers (10) securing bracket (11) to engine; remove bracket (11). g. If damaged, remove two studs (12) and washers (10) from engine block. 3-19.2.  Inspection. a. Inspect linkage for bends or any other damage. b. Inspect threaded components for thread damage. c. Refer to end item maintenance manual for inspection of solenoid. 3-19.3.  Adjustment.  For adjustment of fuel solenoid installation.  Refer to end item maintenance manual. 3-19.4.  Installation. a. If removed, install two studs (12, FIGURE 3-14) and washers (10) in engine block. b. If removed, position bracket (11) on studs (12) and secure with two nuts (9) and washers (10). c. If  removed,  screw  linkage  (5)  into  solenoid  (8)  leaving  number  of  threads  exposed  as  noted  during  removal. Tighten linkage locknut. d. Position solenoid (8) with linkage (5) on bracket (11) and secure with two capscrews (6) and washers (7). e. Connect linkage (5) to lever (13) using capscrew (1), knob (2), washer (3), and retaining nut (4). f. Connect electrical leads to solenoid (8) as tagged during removal.  Remove tags. g. Adjust fuel solenoid installation.  Refer to end item maintenance manual. 3-30