ARMY TM 9-2815-254-24
AIR FORCE TO 38G1-94-2
c.
Clean intake manifold (7) and exhaust manifold (8), mating surfaces, and cylinder head mating surface of any
traces of old gasket.
d.
Position new gasket (9) on studs in cylinder head.
NOTE
lntake manifold and exhaust manifold must be installed as an assembly.
e.
Position exhaust manifold (8) and intake manifold (7) on studs and secure hand-tight at points ‘A’ and ‘B’ with
nuts (4), new lockwashers (5), and washers (6).
f.
Install two, bolts (3) hand-tight.
g.
Tighten all nuts (4) and bolts (3) to 168 in-lbs (19.0 Nm).
h. Install hose (2) to inlet pipe (13) and secure with clamp (1).
3-84
|
|
