ARMY TM 9-2815-254-24 AIR FORCE TO 38G1-94-2 m.    Remove rocker arm cover and rocker arm assembly, refer to paragraph 3-26.1. n. Remove pushrods, cylinder head assembly and cylinder head gasket, refer to paragraph 3-27.1. Check for bent push rods and discard cylinder head gasket. o. Remove crank shaft pulley and front gear cover, refer to paragraph 3-25.1. p. Remove oil pan, refer to paragraph 3-17.1. q. Remove flywheel and flywheel housing, refer to paragraph 3-31.1 r. Remove crankcase, refer to paragraph 3-29.1. s. Remove oil pump, refer to paragraph 3-18.1. t. Remove idler gear assembly, refer to paragraph 3-30.1. u. Remove pistons, connecting rods, and crankshaft, refer to paragraph 3-28.1. v. Remove camshaft assembly, refer to paragraph 3-30.1. w. Disassemble cylinder block assembly, refer to paragraph 3-32.1. x. Cap/cover all openings to prevent entry of foreign material. 3-4.2.   Assembly. a. Remove all caps/covers installed during disassembly. b. Assemble cylinder block assembly, refer to paragraph 3-32.3. c. Install camshaft assembly, refer to paragraph 3-30.5. d. Install crankshaft, pistons, and connecting rods, refer to paragraph 3-28.5. e. Install idler gear assembly, refer to paragraph 3-30.5. f. Install oil pump, refer to paragraph 3-18.3. g. Install crankcase, refer to paragraph 3-29.3. h. Install flywheel housing and flywheel, refer to paragraph 3-31.3. 3-14