ARMY TM 9-2815-254-24
AIR FORCE TO 38G1-94-2
FIGURE 3-14. Removing Tappet (Typical)
Be careful not to let plunger (24) come in contact with other parts. Place
them in clean diesel fuel in their order of removal.
z.
Using mechanical finger through bottom plug hole, remove plunger (24), lower spring seat (25) and spacer
ring (26)
aa. Remove spring (27) through bottom plug hole.
ab. Remove upper spring seat (28) and then remove cylinder sleeve (29), sleeve pinion (30), and screw (31) as
an assembly.
N O T E
If cylinder sleeve assembly is to be disassembled, scribe a mark on
sleeve (29) and sleeve pinion (30) to aid in assembly.
ac. If necessary, loosen screw (31) and remove sleeve pinion (30) from cylinder sleeve (29).
3-39
|
|
