ARMY TM 9-2815-255-24
AIR FORCE TO 38G1-95-2
MARINE CORPS TM 2815-24/4
d. Service engine lubrication system, refer to end item maintenance manual.
3-18. OIL FILLER ASSEMBLY.
3-1 8.1. Removal.
a.
Drain engine lubrication system, refer to end item maintenance manual.
b.
Remove two capscrews (5 and 7, FIGURE 3-32) and washers (6) securing filler neck (8) to engine block.
Remove filler neck (8) and gasket (9); discard gasket.
c.
Cover all openings.
3-18.2. Inspection.
a.
Inspect filler neck for cracks or other damage.
b.
Inspect filler cap (10, FIGURE 3-32) and gasket (11) for damage. Replace as necessary.
3-1 8.3. Installation.
a.
Remove covers.
b.
Position new gasket (9, FIGURE 332) and filler neck (8) on engine block and secure with two capscrews (5 and
7) and washers (6).
c.
Service engine lubrication system, refer to end item maintenance manual.
3-19. Oil DIPSTICK.
3-19.1. Removal.
a.
Remove dipstick (1, FIGURE 3-33) from tube (3). Remove and discard preformed packing (2).
NOTE
Count number of threads exposed above jam nut (4) before loosening. This will aid in proper
installation of tube (3).
b.
Loosen jam nut (4) and unscrew tube (3) from engine block. Remove jam nut (4) from tube.
3-61
|
|
