|
|
|
|
|
ARMY TM 9-2815-256-24
AIR FORCE TO 38G1-96-2
MARINE CORPS TM 2815-24/5
a.
Loosen fuel supply line at fuel injection pump.
b.
Operate primer lever of fuel supply pump until fuel flow is free from air bubbles. Tighten fuel supply line to 22 ft-
lbs (30 Nm). Continue operating hand primer until pumping action is not felt. Pull hand primer outward (away
from block) as far as it will go.
3-23.4. Bleed At Fuel Injection Nozzles.
a.
Place throttle lever in fast idle position.
CAUTION
Always use two wrenches when loosening or tightening fuel lines at nozzles and/or injection pump
to avoid damage.
3-77
|
|
|
|
|
Privacy Statement -
Copyright Information. -
Contact Us
