ARMY TM 9-2815-256-24
AIR FORCE TO 38G1-96-2
MARINE CORPS TM 2815-24/5
FIGURE 3-127. Timing Gear Cover
NOTE
Seal case has dry sealant, do not add sealant.
c.
Support back side of timing gear cover with wood blocks.
d.
Using a seal installer, install oil seal (5) to bottom of bore with spring loaded lip facing inward while supporting
seal bore area from back side of cover.
e.
Make sure gasket surfaces on cover (6) and front plate are clean.
f
Apply a light coating of sealing compound (FORMAGASKET2) to cylinder block side of a new gasket (7).
Position gasket (7) on timing gear cover (6) and trim bottom of gasket (7).
g.
Put light coating of engine lubricating oil (MIL-L-2104) on oil seal (5) lips.
Change 3
3-166
|
|
