ARMY TM 92815-256-24 AIR FORCE TO 38G1-96-2 MARINE CORPS TM 281524/5 1-9.  EQUIPMENT DATA. 1-9.1.  Leading Particulars.  For a list of Leading Particulars, refer to TABLE 1-1. TABLE 1-1.  Table of Specifications Model ...............................................................................................................John Deere 6059T Type..........................................................................Six cylinder, four cycle, turbocharged diesel Bore .............................................................................................................. 4.19 in.  (106.5 mm) Stroke ........................................................................................................... 4.33 in.  (110.0 mm) Displacement ...............................................................................................359 cu in.  (5.9 liters) Compression Ratio..............................................................................................................17.8:1 Firing Order................................................................................................................. 1-5 3-6-2-4 Width ............................................................................................................... 20.4 in.  (519 mm) Height ............................................................................................................ 40.7 in.  (1034 mm) Length............................................................................................................ 44.0 in.  (1118 mm) Weight ...............................................................................................................1040 lbs (472 kg) Injection Pump/Governor............................................................................Stanadyne Model DB2 Injection Starting Pressure New.............................................................................. 3650-3750 psi (25,167 - 25,856 kPa) Used............................................................................................3000 psi (20,685 kPa) Min. Cylinder Compression Pressure............................................................... 350 psi (2400 kPa) Lubrication System Capacity ................................................................................18 qts (17 liters) Coolant System Capacity (engine only) .............................................................11 qts (10.4 liters) Alternator .......................................................................................Prestolite 24 volt DC - 42 amp Starter ........................................................................................Nippondenso 24 volt DC - 4.5 kw Section III.  PREPARATION FOR USE 1-10.  INSPECTING AND SERVICING ENGINE. This  section  provides  information  and  guidance  for  inspecting,  servicing,  and  installing  the  engine.    For  additional information, refer to end item maintenance manual. 1-10.1.  Inspection. a. Check that all packing materials have been removed. b. Check engine identification plate for positive identification. c. Inspect engine exterior for shipping damage. d. Check fan drive belt for proper tension.  Refer to end item maintenance manual. e. Inspect engine for loose or missing mounting hardware, or damaged or missing parts. 1-10.2.   Service.  Except for servicing the lubrication system all other servicing must be accomplished after engine is mounted in the end item.  Refer to the end item maintenance manual. 1-4