ARMY TM 9-2815-256-24
AIR FORCE TO 38G1-96-2
MARINE CORPS TM 2815-24/5
FIGURE 3-161. Location of Cylinder Liner Shim
(3)
Use deglazer, to deglaze liner and obtain a 45 degree cross hatch pattern, refer to FIGURE 3-163.
FIGURE 3-162. Deglazed 45 Degree Cross Hatch Pattern
(a)
Chuck deglazer in a 1/2 inch slow speed drill.
(b)
Apply honing oil (MB-30) into cylinder liner. Insert deglazer into cylinder liner.
(c)
Move deglazer in an up and down direction 10 to 12 complete strokes per cylinder. Move deglazer
rapidly enough to obtain a 45 degree crosshatch pattern as shown in FIGURE 3-162.
(4)
Thoroughly clean cylinder liners after deglazing.
3-209
|
|
