ARMY TM 9-2815-257-24 AIR FORCE TO 38G1-128-2 MARINE CORPS TM 10155A/2815-24/3 3-16 3-13.  FLYWHEEL HOUSING AND COVER MAINTENANCE This task covers removal, cleaning, inspection, and installation. INITIAL SETUP Tools: Equipment Condition: Tool Kit, General Mechanic’s Automotive Recoil starter assembly removed (Item 2, App. B, Sect. III)      (Para. 3-12) Parts/Materials: Solvent, Dry Cleaning (Item 7, App. E) Rag, Cleaning (Item 8, App. E) A.    REMOVAL. 1. Remove  flywheel  housing  (1,  Figure  3-3)  from cylinder  block  (5)  by  removing  four  screws  (2) and washers (3).  Remove seal (4). 2. Remove   the   cylinder   head   fin   cover   (6)   by removing screw (7), grommet (8), and collar (9).   Remove seal (10).   B.    CLEANING.   Cleaning solvents are flammable and toxic to eye, skin,    and    respiratory    tract.        Skin    and    eye protections are required when working in contact with   cleaning   solvents.      Avoid   repeated   or prolonged contact.  Work in well ventilated area only.    Keep  away  from  heat,  sparks,  and  open flame.      Do   not   smoke   while   using   cleaning solvent.      Failure   to   observe   this  warning  can result in injury or death to personnel. Clean  components  with  cleaning  solvent  and  a clean rag.  Allow to air dry. Figure 3-3.  Flywheel Housing Removal WARNING