ARMY TM 9-2815-259-24
AIR FORCE TO 38G1-125-2
MARINE CORPS 09249A/09246A-24
4-43
FIGURE 4-38. INSPECTING TURBOCHARGER BEARINGS
CAUTION
Oil inlet line is fragile and can become twisted and damaged during
maintenance. Always use one wrench to hold one fitting stationary while
the other fitting is loosened or tightened. Failure to comply can cause
damage to equipment.
(6) Connect oil inlet line (3) to turbocharger (12) and torque to 20 lb-ft (27 Nm).
(7) Position hose (2) and hose clamps (1) on turbocharger (12) and intake manifold. Tighten hose
clamps.
(8) Connect air intake line and exhaust line to turbocharger, refer to TM 9-6115-671-14.
(9) Place throttle system so engine cannot start, refer to TM 9-6115-671-14.
|
|