ARMY TM 9-2815-259-24 AIR FORCE TO 38G1-125-2 MARINE CORPS 09249A/09246A-24 5-59 CAUTION For flexible gasket to seal properly, tighten screws to specified torque using a cross pattern within 10 minutes after parts are assembled. (5) Install front plate (2, Figure 5-65). (6) Secure front plate (2) with six TORX screws (3).  Tighten screws to 18 lb-ft (25 (Nm). (7) Install threaded studs (1).  Tighten studs to 26 lb-ft (35 (Nm). (8) Install idler gears, refer to paragraph 5.4.2. (9) Install oil pump and drive gear, refer to paragraph 5.4.9. (10)   Install fuel injection pump and drive gear, refer to paragraph 4.6.1. (11)   Install camshaft, refer to paragraph 5.4.1. (12)   Install timing gear cover, refer to paragraph 4.9.2. FIGURE 5-66.  FRONT PLATE SEALANT APPLICATION