ARMY TM 9-2815-259-24
AIR FORCE TO 38G1-125-2
MARINE CORPS 09249A/09246A-24
1-5
1.10. EQUIPMENT DATA.
Leading Particulars. For a list of Leading Particulars, refer to TABLE 1-1.
TABLE 1-1. TABLE OF SPECIFICATIONS
Model ...................................................................................
John Deere TO4045TF150
Type .....................................................................................EPA compliant four cylinder, four cycle, turbocharged
diesel
Bore .....................................................................................
4.19 in. (106 mm)
Stroke ...................................................................................
5.00 (127.0 mm)
Displacement ........................................................................
276 cu in. (4.5 liters)
Compression Ratio ...............................................................
17.0:1
Firing Order..........................................................................
1-3-4-2
Width....................................................................................
23.5 in. (598 mm)
Height ...................................................................................
38.6 in. (980 mm)
Length...................................................................................
33.9 in. (861 mm)
Weight ..................................................................................
872 lbs (396 kg)
Injection Pump/Governor .....................................................
Stanadyne Model DB4
Injection Starting Pressure
New .............................................................................
3,660 psi (25,200 kPa) min
Used ............................................................................
3,330 psi (22,950 kPa) min
Cylinder Compression Pressure...................................
350 psi (2400 kPa) min
Lubrication System Capacity................................................
14.0 qts (13 liters)
Coolant System capacity (engine only).................................
15.5 qts. (14.7 liters)
Alternator..............................................................................
Bosch 28 volt DC - 45 amp
Starter ...................................................................................
Nippon-Denso 24 volt DC - 4.5 kw
1.11
DATA PLATES.
Refer to Table 1-2 for the engine option codes. The engine option codes data plate is affixed to the top of the rocker arm cover (4,
Figure 1-1). These codes indicate which of the engine options were installed on your engine at the factory. These codes are
important when parts and service are required. The engine option code includes an engine base code (1, Figure 1-2) which
identifies the basic engine installed. The engine option code consists of a four-digit number. The first two digits of each code
identify a specific group, such as alternators. The last two digits of each code identify one specific option provided on your
engine, such as 12-volt, 55-amp alternator. If an engine is ordered without a particular component, the last two digits of that
functional group option code will be 99, 00, or XX.
FIGURE 1-2. OPTION CODE LABEL
|
|