ARMY TM 9-2815-259-24 AIR FORCE TO 38G1-125-2 MARINE CORPS 09249A/09246A-24 5-101 (12)   Install camshaft bushing and timing gears, refer to paragraph 5.4.1. (13)   Time all gears with No. 1 cylinder at TDC compression stroke, refer to paragraph 5.4.1. (14)   Install timing gear cover and install new front seal, refer to paragraph 4.9.2. (15)   Install oil pan, refer to paragraph 4.5.3. (16)   Install oil pressure regulating valve, refer to paragraph 4.5.2. (17)   Install cam followers in same order as removed, refer to paragraph 4.7.4. (18)   Install cylinder head gasket, refer to paragraph 4.7.4. (19)   Install cylinder head, push rods, and rocker arm assembly, refer to paragraph 4.7.3. (20)   Install starting motor, refer to paragraph 3.9.2. (21)   Install injection nozzles (with new seals), refer to paragraph 4.6.2. (22)   Install injection lines, refer to paragraph 4.6.1. and 3.12.4. (23)   Install fuel filter, refer to paragraph 3.12.2. (24)   Install fuel supply pump, refer to paragraph 3.12.3 (25)   Install fuel lines, refer to paragraph 3.12.4.   (26)   Install oil cooler, refer to paragraph 3.11.3.   (27)   Install new oil filter, and dipstick, refer to paragraph 3.11.5. (28)   Install water manifold or thermostat housing and thermostats, refer to paragraph 3.8.2. (29)   Install exhaust manifold, refer to paragraph 4.4.3. (30)   Install turbocharger, refer to paragraph 4.4.1.  Prelube the turbocharger, refer to paragraph 4.4.1. (31)   Install water pump, refer to paragraph 3.8.3. (32)   Install hoses, refer to TM 9-6115-671-14. (33)   Install crankshaft pulley, refer to paragraph 4.9.1. (34)   Install alternator, refer to paragraph 3.9.1. (35)   Install belt tensioner, fan and fan belts, refer to TM 9-6115-671-14. (36)   Adjust valves, refer to paragraph 4.7.2. (37)   Install rocker arm cover, refer to paragraph 4.7.1.