ARMY TM 9-2815-260-24 AIR FORCE TO 38G1-126-2 MARINE CORPS TM 09244A/09245A-24 4-51 CAUTION Fuel injection pump gets very hot during operation.  Never steam clean or pour water on fuel injection pump while fuel injection pump is running or warm.  Failure to comply could cause seizure of internal rotating parts. CAUTION Dirt in the fuel system can damage components or cause poor engine performance.  Always thoroughly clean the area around connection before disconnecting.  Always cover all openings after disconnecting.  Failure to comply can cause damage to components or poor engine performance. (2) Thoroughly clean outside surface of fuel injection pump, fuel lines, and surrounding area with cleaning solvent or steam cleaner. (3) Disconnect electrical connector mounted on top of pump which leads to governor. __________ WARNING Diesel or JP fuel is flammable and toxic to eyes, skin, and respiratory tract. Skin and eye protection are required.  Avoid repeated/prolonged contact.   Provide adequate ventilation.  Failure to comply could result in serious injury or death. CAUTION Fuel lines are fragile and can become twisted and damaged during maintenance.  Always use one wrench to hold one fitting stationary while the other fitting is loosened or tightened.  Failure to comply can cause damage to equipment. NOTE Catch fuel in suitable container. NOTE Disconnect all fuel delivery (pressure) lines from injection pump using a suitable 17 mm deep-well crowsfoot socket. (4) Disconnect throttle cable from throttle arm (39). (5) Disconnect fuel return line (3, Figure 3-17), fuel supply line (31), and fuel injection lines (7, 8, 9, 10, 11 and 12). (6) Remove capscrews (9, Figure 4-61), gear cover (8), and O-ring (7).  Discard O-ring.