ARMY TM 9-2815-260-24 AIR FORCE TO 38G1-126-2 MARINE CORPS TM 09244A/09245A-24 5-90 5.4.7.   CYLINDER BLOCK. NOTE The following procedures require complete access to the engine.  If necessary, remove engine from generator set, refer to TM 9-6115-672-14.   Mount engine on repair stand (NSN 4910-01-016-1835 or equal) as outlined in paragraph 4.10. a.     Disassembly. (1) If not already performed, mount engine on vehicle engine stand (NSN 4910-01-016-1835 or equal).  Refer to paragraph 4.10. (2) Drain coolant and oil.  Refer to TM 9-6115-672-14. (3) Remove fan belts.  Refer to TM 9-6115-672-14. (4) Remove alternator, refer to paragraph 3.9.1. (5) Remove turbocharger, refer to paragraph 4.4.1. (6) Remove exhaust manifold, refer to paragraph 4.4.3. (7) Remove rocker arm cover, refer to paragraph 4.7.1.  If option code label is located on rocker arm cover, be careful not to damage label. (8) Remove water manifold and thermostat housing, refer to paragraph 3.8.2. (9) Remove oil cooler piping, refer to paragraph 3.11.3. (10) Remove water pump, refer to paragraph 3.8.3. (11) Remove dipstick, refer to paragraph 3.11.5.   (12) Remove oil filter and oil cooler, refer to paragraph 3.11.3. (13) Remove oil pressure regulating valve assembly, refer to paragraph 4.5.2. (14) Remove fuel filter, refer to paragraph 3.12.2. (15) Remove fuel supply pump, refer to paragraph 3.12.3. (16) Remove fuel line, refer to paragraph 3.12.4. (17) Remove injection lines, refer to paragraph 3.12.4. (18) Remove injection pump, refer to paragraph 4.6.1. (19) Remove injection nozzles, refer to paragraph 4.6.2. (20) Remove starter, refer to paragraph 3.9.2.