Quantcast TURBOCHARGER TV61

Custom Search
 
  
 
3500 ENGINE
SPECIFICATIONS
TURBOCHARGER TV61
(1)
Nut  for  impeller  (See  TURBOCHARGER
Diameter for the surfaces (journals) on the shaft for the
IMPELLER INSTALLATION).
bearings ........ 15.E875 to 15.885 mm (.6250 to .6254 in.)
(5)
Bore in the housing
NOTICE
............24.961 to 24.973 mm (.9827 to .9832 in.)
Do not bend or add stress to the shaft when the nut
is loosened or tightened.
Outside diameter of the
bearings ...........24.846 to 24.859 mm (.9782 to .9787 in.)
(2)
Torque for the bolts that hold
the backplate .............10 + 1 Nm (90 + 10 lb. in.)
(6)
Clearance between the ends of the oil seal ring
(when installed
(3)
Torque for the clamp
in its bore) .......0.20 to 0.38 mm (.008 to .015 in.)
bolts ...................14.0 + 1.5 Nm (120 + 13 lb. in.)
Lightly hit all around clamp with a soft faced
(7)
End play for the
hammer and again
shaft .............. 0.08 to 0.25 mm (.003 to .010 in.)
tighten to............14 0 + 1.5 Nm (120 + 13 lb. in.)
(8)
Torque for bolts and nuts that hold the
(4)
Bore in the bearings
turbocharger to the exhaust manifold (put
............ 15.921 to 15.931 mm (.6268 to .6272 in.)
5P3931 Anti-Seize Compound on the threads)
54 + 5 Nm (40 4 lb. ft.)
18


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.