| Tweet |
Custom Search
|
|
|
||
 3500 ENGINES
DISASSEMBLY AND ASSEMBLY
TURBOCHARGERS
3.
Install the O-ring seals on both ends of pipe (3)
and put clean engine oil on the seals. Install
flange (4) on the pipe and install pipe (3) on the
engine.
4.
Make sure the gasket is in position and connect
oil supply line (5) to the turbocharger.
5.
Install the O-ring seal on drain tube (6) and put
clean engine oil on it. Install elbow (7) on the
drain tube.
6.
Install the gaskets, elbow (7) and turbocharger
oil drain tube (6) on the engine.
7.
Fasten a hoist to air cleaner housing (8) and put
it in position on the turbocharger compressor
housing. Install the bolts that hold housing (8) to
bracket (10) and tighten clamp (9).
8.
Install the support assembly between the air
cleaner housings.
9.
Do Steps I through 8 for the other turbocharger.
314
|
||
|
||
