DISASSEMBLY AND ASSEMBLY
(AIRESEARCH TV61 AND TW61)
a) remove turbochargers
Install the turbocharger on tool (A) as
shown. Put marks on the three housings of
the turbo- charger for correct installation
and alignment at assembly.
Loosen clamp (1) and remove compressor
housing (2) and the clamp from the
Loosen clamp (3) and remove cartridge
assembly (4) from turbine housing (5).
To prevent a bent shaft, do not put a side force on
the turbine shaft when the compressor wheel nut is
Install tool (C) in tool (B) and put the
cartridge assembly in tool (C) as shown.
Use tool (D) to remove the nut that holds
compressor wheel (6).
Use a press to push the turbine shaft out of
compressor wheel (6) and the cartridge
housing. Remove compressor wheel (6)
from the cartridge housing.