DISASSEMBLY AND ASSEMBLY
Install the pilot assembly part of tool group (C)
on one end of the camshaft.
Install the handle part of tool group (C) on the
other end of the camshaft.
Pull camshaft (12) out of the engine block until a
hoist can be fastened to it.
Put identification on the camshafts as to their
location in the engine so they can be installed correctly.
Remove camshaft (12) and tool group (C) from
the engine. The weight of the 3512 camshaft is 63 kg
(140 lb.). The 3508 Camshaft weight is 43 kg (95 lb.).
If necessary, remove bolts (13) to make a
separation of the 3512 Camshaft only.