TM   5-2815-241-34&P WATER  PUMP  INSTALLATION INITIAL   SETUP Tools Tools  -  Continued Extension,   6-inch,   1/2-inch   drive Gage,  belt  tension,  ST-1274 Handle,   ratchet,   1/2-inch   drive Socket,   9/16-inch,   1/2-inch   drive Socket,   7/8-inch,   1/2-inch   drive Wrench,  open-end,  l-inch Wrench,  open-end,  1  1/16-inch Wrench, torque, 0 to 250 ft lb (0 to 350 N•m), 1/2-inch   drive Materials/Parts Belt,  water  pump  (two  required) Gasket,   water   pump Lockwasher   (seven   required) ACTION LOCATION ITEM REMARKS 1.  Front  of  cylinder block  (1) New gasket (2), water pump (3) seven  new  lock- washers  (4),  and seven  screws  (5) a. b. c. d. Position  on  front  of  cylinder  block. Using   1/2-inch   drive   9/16-inch   socket, 6-inch  extension,  and  0  to  250  ft  lb  (0  to 350  N•m)  torque  wrench,  torque  screws to 10 ft lb (13 N•m). Repeat  torquing  to  20  ft  lb  (27  N•m). Repeat torquing for final torque of 30 ft lb (41 N•m). T A    2 4 2 4 1 3 2-121