TM 5-2815-241-34&P
CYLINDER BLOCK - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
53.
NOTE
Steps 53 thru 56 are provided for cylinder blocks tagged for counterbore cutting.
ST-1059 driver (5),
ST-1084 adapter (6),
and ST-1065
holder (7)
Attach together and place unit on cylinder
block with holddown holes matching in
cylinder block.
54. ST-1064 adapter (8)
Holddown capscrews
and washers (8)
Install through ST-1064 adapter into cylinder
block, finger tight. Using 1/2-inch drive
1 1/18-inch socket and 0 - 800 ft lb (0 -
813.8 N•m) torque wrench, torque to 50 to
75 ft lb (70 to 105 N•m).
TA 242441
2-183
|
|
