FUEL PUMP - CONTINUED
FUEL PUMP HOUSING REPAIR - CONTINUED
Heat-protective cloth mittens must be worn to prevent serious injury to hands when
handling heated parts.
110. Fuel pump
Spring pack housing
(2) and barrel
Aline spring pack housing fuel passages
with fuel passages in spring pack hous-
ing bore and scribe a center line on
spring pack housing and spring pack
Heat fuel pump housing using machin-
ists scribe to 300oF (149oC). Drop in
barrel assembly and, using arbor press
and mandrel, press in spring pack hous-
ing, with scribe marks alined, until it
bottoms against barrel assembly.
Make sure clip hole is towards bottom
of fuel pump housing.
Using ST-853 driver, install clip into bottom
of spring pack housing (2) with slot towards
front of fuel pump housing (1).