Quantcast Positioning filler and bleeder.

Custom Search
 
  
 
TM 55-4920-436-13&P
5. Repeat steps 1 thru 4 with other ECU.
e. Positioning filler and bleeder.
1.  Remove two floor bolts (1) from filler and
bleeder (2) support brackets (3).
2. Loosen two bolts (4) on each of the two
support brackets (3). Slide brackets up and
retighten bolts.
4. Install three special retainer screws (4) thru
bottom bar (5) into face of ECU (3) and tighten.
2-13


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.