7-14. CRANKCASE BREATHER REPLACEMENT (Cont)
(1) Remove bolt (7), flat washer (8), and spacer (9) securing filter element (10) and shell (11) to
adaptor (12). Remove shell from element.
(2) Remove two bolts (13) and two Iockwashers (14) securing breather pipe(15) and gasket
(16) to adaptor (12). Discard gasket and Iockwashers.
Dry cleaning solvent P-D-680 is toxic and flammable. Wear protective
goggles and gloves and use only In a well-ventilated area. Avoid
contact with skin, eyes, and clothes and dont breathe vapors. Do not
use near open flames or excessive heat. The flash point is 100oF-138°F
(38oC-50oC). If you become dizzy while using cleaning solvent, get
medical aid. If contact with eyes is made, wash your eyes with water
and get medical aid immediately.
Compressed air used for cleaning purposes will not exceed 30 PSI.
Use only effective chip guarding and personal protective equipment
(goggles/shield, gloves, etc).
Clean all parts with dry cleaning solvent and dry with compressed air.
Inspect adaptor, pipe, and shell for cracks, pitting, or damage.
Inspect filter element for cuts, tears, or damage.