Quantcast INSTALLATION (Continued) - TM-9-2815-220-240916

Custom Search
 
  
 
TM 9-2815-220-24
FUEL INJECTION TUBES REPLACEMENT
0113 00
INSTALLATION (Continued)
16. Install floating clamps in location shown in illustration (see detail G).
CAUTION
When bending injection tubes is required, be careful not to nick
tubing. The bending tools are designed to allow bending without
nicks.
a. Assure that fairlead halves (28) are aligned with tubes to fit within 1/8 inch (3.175 mm) in
any direction. Use two bending tools (24) (item 13, WP 0177).
b. Apply a small amount of Lubriplate (item 23, WP 0173) to threads of four screws (25).
c. Install retainers (30) fairlead halves (28), and strap (37) using screws (25) with new self-
locking nuts (27) (item 38, WP 0175).
d. Tighten screws (25) to 160-180 inch-pounds (18-20 Nm).
Right Bank
G
25
30
Damper
End
28
24
30
37
27
Left Bank
G
WP 0113 00-12

 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.