Quantcast INSTALLATION (Continued) - TM-9-2815-220-240917

Custom Search
 
  
 
TM 9-2815-220-24
FUEL INJECTION TUBES REPLACEMENT
0113 00
INSTALLATION (Continued)
17. Install floating clamp in location shown in illustration (see detail H).
CAUTION
When bending injection tubes is required, be careful not to nick
tubing. The bending tools are designed to allow bending without
nicks.
a. Assure that clamp half (38) does not interfere with cooling fan and that tubes are parallel
with each other. Use two bending tools (24) (item 13, WP 0177).
b. Apply a small amount of Lubriplate (item 23, WP 0173) to threads of one screw (39).
c. Install clamp halves (38, 40), using screw (39) with new self-locking nut (41) (item 111,
WP 0175) and two flat washers (42) as shown.
d. Tighten screw (39) to 75-100 inch-pounds (8.5-11.3 Nm).
Right Bank
Damper End
H
39
42
38
24
40
42
41
H
Left Bank
WP 0113 00-13

 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +