CRANKSHAFT DAMPER REPAIR
1. Install vibration damper.
a. Position crankshaft and damper (1) so that one mounting bolthole is at the 12 o'clock
position and dowel pin (2) hole (A) is at approximately the 7 o'clock position.
b. Insert tapered bolt (item 16 WP 0177) (3) in bolt hole at the 12 o'clock position.
c. Insert lifting strap through center of damper (1) and attach to suitable lifting device.
d. Lift just enough to align damper wheel on tapered bolt (3) and slide damper (1) onto bolt.
e. Remove lifting device and strap.
f. Slide damper (1) forward until seated on hub and dowel pin (2).
END OF WORK PACKAGE
WP 0140 00-5 (6 blank)