Custom Search
 
  
 
TM 9-2815-250-24&P 2-21.  INTAKE MANIFOLD REPLACEMENT (continued). 2. Remove two socket head screws (8) and socket head screws (9), four washers (7), spring tension washers (15), and  nuts  (16),  access  cover  (14),  and  four-part  gasket  (6)  from  intake  manifold  (1).    Discard  spring  tension washers and gasket. 3. Remove  four  self-locking  nuts  (10)  and  spring  tension  washers  (11),  intake  manifold  (1),  and  two  gaskets  (12) from four studs (13).  Discard self-locking nuts, spring tension washers, and gaskets. b. INSTALLATION 1. Install two new gaskets (12), intake manifold (1), and four new spring tension washers (11) and new self-locking nuts (10) on four studs (13). 2. Install new four-part gasket (6), access cover (14), four nuts (16), new spring tension washers (15), and washers (7), and two socket head screws (8) and socket head screws (9) on intake manifold (1). 2-16


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business