ARMY TM 9-2815-254-24P
AIR FORCE TO 38G1-94-4
3 EXPLANATION OF COLUMNS (SECTION II AND III). (Continued)
e. DESCRIPTION AND USABLE ON CODE (UOC) (Column (5)). This column includes the following
The Federal item name and, when required. a minimum description to identify the item.
Items that are induded in kits and sets are listed below the name of the kit or set
Spare/repair parts that make up an assembled item are listed immediately following the assembled item
Part numbers for bulk materials are referenced in this column in the line item entry for the item to
When the item is not used with all serial numbers of the same model, the effective serial numbers are
shown on the last line(s) of the description (before UOC).
(6) The UOC, when applicable (see paragraph 5, Special Information).
(7) In the Special Tools List section, the Basis of Issue (BOI) appears as the last line(s) in the entry for each
special tool, special TMDE, and the other special support equipment. When density of equipments supported exceeds
density spread indicated in the BOI, the total authorization is increased proportionately.
The statement END OF FIGURE' appears just below the last item description in Column 5 for a given
figure in Section II.
QTY (Column (6)). The QTY (quantity per figure column) indicates the quantity of the item used in the
breakout shown cm the illustration figure. which is prepared for a functional group, subfunctional group. or an assembly.
A "V" appearing in this column in lieu of a quantity may vary from application to application.