ARMY TM 9-2815-255-24
AIR FORCE TO 38G1-95-2
MARINE CORPS TM 2815-24/4
FIGURE 3-46. Speed Droop Governor
Unless they are damaged, spring (42) and piston assembly (43) should be left attached to
governor arm (44). (6) If damaged, remove spring (42) and piston assembly (43) from governor
Depress metering valve and arm (45) and raise governor linkage hook assembly (46) from metering valve arm
pin. While holding governor arm (44) forward, pull linkage hook back slightly to disengage it from governor arm.
Place linkage hook assembly over side of housing, refer to FIGURE 3-47. Do not disengage linkage spring (47,
FIGURE 3-47. Disengaging Governor Linkage (Typical)
Remove metering valve and arm (45), shim (48), and spring (49) from housing, refer to FIGURE 3-48.