ARMY TM 9-2815-260-24 AIR FORCE TO 38G1-126-2 MARINE CORPS TM 09244A/09245A-24 5-48 CAUTION Camshaft must be replaced if dropped or damaged.  Do not allow camshaft to strike floor when removing camshaft gear. NOTE Camshaft gear must be removed if camshaft or camshaft gear is to be replaced. (17) If necessary, remove camshaft gear using press.  Transfer painted timing mark from old camshaft gear to new camshaft gear. (18) Cover all openings to prevent entry of foreign material. d.   Test. (1) Remove camshaft, refer to step b. __________ WARNING Cleaning solvent is flammable and toxic to eyes, skin, and respiratory tract.   Skin and eye protection are required.  Avoid repeated/prolonged contact.   Good general ventilation is normally adequate. __________ WARNING Compressed air used for cleaning can create airborne particles that can enter the eyes.  Pressure must not exceed 30 psig (207 kPa).  Eye protection required. (2) Clean camshaft in solvent.  Dry camshaft with compressed air. (3) Inspect all camshaft lobes and journals for wear, damage, or pitting.  Replace camshaft and camshaft followers if wear or damage is found.