Quantcast INDICATOR LIGHT MAINTENANCE.

Custom Search
 
  
 
ARMY TM 9-6115-666-13&P
AIR FORCE TO 35C2-3-505-1
4.16. INDICATOR LIGHT MAINTENANCE.
This task covers:
a. Removal
c. Installation
b. Test
d. Repair
INITIAL SETUP :
Tools
Equipment Conditions
Tool Kit, General Mechanic's (item 1, appendix B)
Reference
Multimeter AN/PSM-45 (item 2, appendix B)
Both generator sets shut down, paragraph 2.7.1
Solder Gun (item 2, appendix B)
Trailer support devices are lowered
Switch box cover removed, paragraph 4.11
Clear plastic panel covers removed,
REMOVAL
NOTE
The switch box has six indicator lamps. Replacement procedures are the same for each
indicator lamp.
1. Tag leads connected to each terminal (1, figure 4-10) of indicator lamp housing to be replaced, and
unsolder each lead.
2. Remove and retain lens (2), O-ring (3) and lamp (4).
3. Remove mounting nut (5) and internal tooth lock washer (6).
4. Slide indicator housing (7) out of switch box assembly.
TEST
Using multimeter, measure continuity between pins. If continuity exists, replace indicator housing.
4-26


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.