| Tweet |
Custom Search
|
|
|
||
 3500 ENGINE
SPECIFICATIONS
OIL PUMP
(2W5474)
Rotation of drive gear (as seen from drive
end)
................................ Clockwise
(1)
Length of gears
0.015
(new)
....... 54.000
mm
(2.1260
.0006 in.)
Depth of bores for gears
....... 54.150 0.020
(new)
mm
(2.1319
.0008 in.)
(2)
Diameter of gear
0.008
shafts (new) .... 31.742
mm
(1.2497
.0003 in.)
Bore in bearings for gear shafts (after
assembly) ....... 31.811 0.013 mm
(1.2524
.0005 in.)
(3)
Distance dowels extend
from cover. ..... 6.0 0.5 mm (.24 .02 in.)
(4)
Distance from the end of the idler shafts
to gear faces........... 34.0 0.5 mm (1.34 .02
in.)
(5)
Distance from the end of the drive shaft
to gear face. ... 47.0 0.5 mm (1.85 .02 in.)
(6)
Depth that bearings are installed
in cover ....... 1.5 0.5 mm (.06 .02 in.)
(7)
Depth that bearings are installed
in housing ....... 1.5 0.5 mm (.06 .02 in.)
(8)
The location of each bearing junction must be as
shown. Position bearing junctions from the
centerline through the bearing bores to an angle
of ............................... .45 + 15
(9)
2S2760 Spring (oil pressure relief):
Length under test force........117.9 mm (4.64 in.)
Test force ....... 490 27 N (110 6 lb.)
Free length after test ...... 52.9 mm (6.02 in.)
Outside diameter .... 27.00 mm (1.063 in.)
26
|
||
|
||
