| Tweet |
Custom Search
|
|
|
||
 3500 ENGINES
DISASSEMBLY AND ASSEMBLY
WATER PUMP
INSTALL WATER PUMP
1361-12
1.
Make sure the gasket for the water line adapter
and the O-ring seal on the pump are in position.
Put clean engine oil on the O-ring seal. Fasten a
hoist to water pump (1) and put water pump (1)
in position on the engine. Make sure the splines
on the pump shaft are correctly engaged and
install the bolts to hold the pump to the oil and
water pump drive adapter.
2.
Install bolts (2) to hold the pump to the water line
adapter.
3.
Install damper guard (3) on the engine.
4.
Make sure the O-ring seals on both ends of tube
(4) are in position and put clean engine oil on the
seals. Put tube (4) in position and install
retainers and bolts to hold the tube in position.
5.
Connect the water supply line to the water pump
inlet.
6.
Fill the cooling system with coolant to the cor-
rect level.
275
|
||
|
||
