| Tweet |
Custom Search
|
|
|
||
 3500 ENGINE ATTACHMENTS
SPECIFICATIONS
ETHER STARTING AID
(1)
Location of atomizer on air inlet manifold.
(2)
Location of temperature switch on regulator
housing.
NOTE: Ether will not inject when water
temperature is above 38C (100 F).
(3)
Atomizer identification mark.
(4)
Direction of spray (toward front of engine).
PRIMARY FUEL FILTER
(1)
Torque for nut ............................. 25 5 N-m (18
+ 4 lb. ft.)
(2)
7S9323 Spring:
Length under test force .............. 27.9 mm (1.10
in.)
Test force ................................... 125 to 145 N
(28 to 33 lb.)
Free length after test .................. 42.7 mm (1.68
in.)
Outside diameter ........................ 17.3 mm (.68
in.)
FUEL FILTER CHANGE INDICATOR GROUP
(1)
Indicator assembly.
Tighten to a torque of ................. 55 + 10 N-m
(40 + 7 lb. ft.)
When indicator can be seen at a position
1/2 of the distance from the top, the fuel
pressure
differential is ............................... 85 to 105 kPa
(12 to 15 psi)
416
|
||
|
||
