TM  5-2815-241-34&P PISTON  COOLING  NOZZLE  INSTALLATION INITIAL   SETUP Tools Handle,   ratchet,   1/2-inch   drive Socket,   1/2-inch,   1/2-inch   drive Wrench,  torque,  0  to  150  ft  lb (0  to  210  N•m) Materials/Parts Lockwasher Packing,  preformed ACTION LOCATION ITEM REMARKS NOTE Step given is typical for all six piston cooling nozzles. Right side of cylinder block (1) Piston   cooling nozzle  (2),  new preformed   packing (3),  screw  (4),  and new  lockwasher  (5) a. b. C. Put  packing  on  piston  cooling  nozzle  and put  in. Put  lockwasher  on  screw  and,  using 1/2-inch   drive   1/2-inch   socket   and ratchet  handle,  screw  in  until  snug. Using   1/2-inch   drive   1/2-inch   socket and 0 to 150 ft lb (0 to 210 N•m) torque wrench,  tighten  to  16  to  22  ft  lb  (22.4  to 30.8  N•m). TASK ENDS HERE T A    2 4 2 4 1 2 2-120