TM   5-2815-241-34&P WATER  HEADER  COVER  INSTALLATION INITIAL   SETUP Tools Materials/Parts Handle,   ratchet,   1/2-inch   drive Socket,   7/16-inch,   1/2-inch   drive Wrench,  torque,  0  to  150  ft  lb  (0  to 210  N•m),  1/2-inch  drive Gasket,   water   header   cover Lockwasher    (six    required) ACTION LOCATION ITEM REMARKS Right side of engine  block  (1) New   water   header cover  gasket  (2), water   header   cover (3),  six  new  lock- washers   (4)   and six  screws  (5) a. Position water header cover gasket and water header cover to right side of engine  block. b. Using   1/2-inch   drive   7/16-inch   socket and ratchet handle, screw in six screws and  lockwashers  until  snug. c. Using   1/2-inch   drive   7/16-inch   socket and 0 to 150 ft lb (0 to 210 N•m) torque wrench,  torque  to  25  to  28  ft  lb  (33.9  to 37.9  N•m). TASK ENDS HERE T A     2 4 2 4 1 7 2-125