TM 5-2815-241-34&P
ENGINE OIL COOLER INSTALLATION
INITIAL SETUP
Tools
Materials/Parts - Continued
Extension, 6-inch, 1/2-inch drive
Handle, ratchet, 1/2-inch drive
Socket, 9/16-inch, 1/2-inch drive
Socket, 3/4-inch, 1/2-inch drive
Socket, 7/16-inch, 1/2-inch drive
Wrench, box-end, 7/16-inch
Wrench, torque, 0 to 150 ft lb (0
to 210 N•m), 1/2-inch drive
Gasket, water header cover
Lockwasher, oil cooler, front (six required)
Lockwasher, oil cooler, rear
Lockwasher, water header cover (six
required)
Oil, lubricating (item 12, appendix B)
Packing, preformed, water transfer tube
(two required)
Packing, preformed, oil filter
Materials/Parts
Personnel Required
Cartridge, oil filter
Gasket, oil cooler
Two
2-127
|
|
