TM    5-2815-241-34&P CYLINDER  BLOCK  -  CONTINUED ACTION LOCATION ITEM REMARKS Be sure to wrap pipe plug threads with antiseizing tape before installation, and install as tagged  in  steps  3  thru  7 69. Cylinder block (1) Pipe  plug  (4) Screw in and tighten using 7/16-inch box wrench. 70. 71. Pipe plug (8) 72. 73. 74. 75. NOTE Pipe plug (5) Screw in and tighten using 3/8-inch drive ratchet  handle. Screw in and tighten using 1/2-inch hex key. Pipe plug (7) Screw in and tighten using 9/16-inch box- end   wrench. Pipe plug (8) Screw in and tighten using 5/16-inch square key. Fitting  (9) Screw in and tighten using 1/2-inch open- end   wrench. Fitting   (10) Screw in and tighten using 11/16-inch open-end  wrench. NOTE FOLLOW-ON  MAINTENANCE: Install  crankshaft  (page  2-54). TASK ENDS HERE TA  242447 2-171