TM   5-2815-241-34&P CYLINDER  HEAD  -  CONTINUED ACTION LOCATION ITEM REMARKS DISASSEMBLY  -  CONTINUED NOTE Each of the eight valve springs can be reached without relocating stud. Compress one valve spring at a time to remove half collets. 2.  Valve  spring  (1) Compression   head   (2) Place  on  valve  spring  retainer  (3)  and press  down  valve  spring  compressor  (4). Remove  and  discard  half  collets  (5). 3.  Valve  guide  (6) Valve  spring  re- tainer  (3),  valve spring  (1),  and spring  seat  (7) Lift off. NOTE Tag  valves  (8)  as  to  their  location  in  cylinder  head  (9)  so  they  can  be  reassembled  in the  same  valve  guide  (6). 4.  Cylinder  head  (9) Valve  (8) Using   16-ounce   ball-peen   hammer,   tap valve (8) down lightly to remove from cylinder  head  (9). Tag  valves  (8)  and  hold  for inspection. TA  242452 2-178