TM  5-2815-241-34&P FUEL PUMP - CONTINUED ACTION LOCATION ITEM REMARKS FILTER  SCREEN  INSPECTION NOTE For  fuel  pump  filter  screen  removal,  see  step  2  (page  2-291). 10.  Filter  screen cover  (1) Cap seal (2) Inspect  for  damage  or  wear. Discard,  If  damaged  or  worn. WARNING Particles blown by compressed air are hazardous. Make certain the airstream is directed away from user and other personnel in the area. Compressed air used for cleaning purposes shall not exceed 30 psi (207 kPa). User must wear safety goggles or face shield to prevent injury. 11. Filter  screen cover  (1) a. Clean in fuel oil and blow dry with com- pressed   air. b. Inspect  for  damage  or  wear. Discard  if  damaged  or  worn. 12. 13. Filter  screen  (3) a. Inspect  for  holes  or  imbedded  foreign particles. b. Clean in fuel oil and blow dry with com- pressed   air. c. Remove any metal particle buildup from magnet  inside  filter  screen. Discard  if  damaged  or  clogged. Spring  (4) Inspect  for  damage  or  wear. Discard  if  damaged  or  worn. TA   242534 2-294